Spray Foam Roofing Oregon

Oregon Spray Foam Insulation offers spray foam roofing, one of the best roofing solutions for flat and low-sloped roofs. We recommend spray foam roofing for your Oregon home or business because installation is fast and maintenance easy.
​
Spray foam roofing or SPF roofing uses the same smart science other spray foam products use. Oregon Spray Foam Insulation applies closed-cell or high-density spray polyurethane foam over existing roofing materials like asphalt, shingle, concrete, metal, or wood. Spray foam roofing also works well for new Oregon structures. As with other foam products, spray foam roofing starts as two liquid chemicals, so coating your Oregon house or business completely is fast and easy. The liquids mix as they are sprayed, completely adhere to all surfaces, and a chemical reaction causes the liquids to expand into highly insulating, waterproof foam. Unlike other roofing materials, spray foam roofing seals and insulates around HVAC units, vents, and skylights on your Oregon roof. Oregon Spray Foam may recommend adding a topcoat over the spray foam roofing of silicone, polyurethane, or acrylic to increase UV light resistance.

Spray Foam Roofing Advantages

​Affordable

Foam roofing costs less. Spray foam roofing is economical because Oregon Spray Foam needs fewer workers to install it, and installation is fast, so labor costs are low. The exceptional insulation factors save you money on your HVAC bills for years to come.

​Spray foam roofs last much longer than most other roofing materials, including shingled and metals. Maintenance costs are also less because if erosion or damage occurs, applying additional spray foam on the section takes care of it inexpensively 

​Fast Installation

Most roofing jobs start with removing the old roof. With roofing foam, there's no need to remove the old roof, which saves days.  If a roof has debris that needs to be removed that takes a little time, but once the roof is ready, applying spray foam roofing to Oregon buildings usually only takes a day or so, depending on the roof’s size. An additional topcoat might add a day or two but adding spray polyurethane foam roofing much faster than other roofing types.

Oregon Spray Foam Installers spray all roof surfaces with spray foam roofing using high-pressure machines called reactors.  They apply thin layers over the roof surfaces, allowing each to dry until they reach the desired thickness.  Only a few installers are needed, and they can complete the job in a day or two.

​Effective Insulation

Construction and insulation industries measure insulation levels as R-factor or R-value. SPF roofing or spray foam roofing has higher R-values than other roofing materials. The three levels of spray foam insulation are open cell, closed cell, and high density. While open cell has a good R-factor, denser closed-cell has higher resistance numbers, and high-density spray foam insulation has the highest. Foam roofing contractors use these two higher levels for spray foam roofing in Oregon.
​
A higher R-value or factor means better insulation.  R stands for resistance as in resistance to air moving in and out. Better insulation means cold winter and hot summer air stay outside and heated and cooled air stay inside. Spray foam roofing encases the roof, leaving no gaps, so your HVAC system doesn’t have to work so hard to maintain comfortable temperatures.
​
The seal you get with spray foam roofing also provides your Oregon roof with excellent waterproofing. Good waterproofing means fewer roof leaks.  The spray foam roofing plus the UV light-resistant topcoat keeps the roof cooler in hot Oregon summers. A roof lasts longer if it stays cooler in hot weather.

​Environmental Advantages

In the cities, roof foam helps prevent an  Urban Heat Island because the spray polyurethane foam roofing and topcoat resist UV light and reduce heat absorption. Have you ever wondered why it’s hotter at night in the city than in surrounding suburban and rural areas? It’s because building roofs and other surfaces like roads and parking lots absorb and hold heat long after the sun goes down. Since roofing foam insulation helps prevent Urban Heat Islands, the air outside stays a couple of degrees cooler, and you’ll save on your air conditioning bills. Of course, that helps the earth because using less electricity benefits the environment.
 
Since spray foam roofing application doesn't require removing the old roofing, less goes into the landfill.  The old roofing stays in place, and spray polyurethane foam roofing installs over it. Repairs on a spray foam roof also don't add to the dump. Any damage can easily be repaired with added foam. Most roofing materials like asphalt shingles must be replaced regularly. Spray foam roofing is a green alternative for Oregon flat and low-slant commercial buildings and homes.
​
Spray foam roofing on Oregon homes and businesses doesn’t deplete the ozone layer. Spray foam uses no Chlorofluorocarbons. 

​Easy Maintenance

​After Oregon spray foam installs SPF roofing, the roof should be inspected twice a year.  If severe storms or unusually high traffic has caused damage, foam roofing repair is easy and costs much less than other types of roof repair.

​Oregon Spray Foam technicians can easily add additional roofing foam. When other roofing materials fail, roofers need to remove and replace them.

​Lasts Longer

Spray foam roofing in Oregon lasts 30 years or longer with regular inspections and proper maintenance.

​While estimates vary, asphalt roofing might last 15 to 20 years. Concrete might last 20 and metal 15-35 years. 

Spray Foam Roofing Disadvantages

​There are only two types of disadvantages when it comes to spray foam roofing in Oregon. One involves application problems and the other weather.

​Application Problems

While Oregon Spray Foam Insulation only uses highly trained, experienced installers, several problems could occur with untrained foam roofing contractors.

• Roof Preparation – A roof must be cleaned of all debris.  Spray foam installed over dirt and debris will fail and need to be redone.
• Mixing – Without training, an installer could mix the two chemicals in the wrong proportions. They must be combined in exact percentages to produce efficient insulating foam.
• Spraying Technique – Inexperienced workers might spray the foam unevenly, interfering with the foam’s effectiveness.  If the combination of layers isn't thick enough, the insulation will not be as good as possible. The layers should be added gradually, and each thin layer cooled before adding the next.

​Weather Limitations

We must apply spray foam roofing to your Oregon home or business during the right weather conditions. Temperatures should be moderate and humidity low.  When a stretch of bad weather prevents installation, that can be frustrating, but installing under less-than-ideal conditions might mean redoing the job.

Conclusion

Comparing the foam roofing pros and cons, we recommend spray foam roofing for Oregon roofs. Foam roofing insulation costs less than other materials and saves money on energy bills. The waterproofing prevents roof leaks and installing spray foam roofing rather than other roofing helps the environment. Our professionals will get the job done quickly.  Spray foam roofing lasts a long time, and maintenance is easy and inexpensive.
​
Call our Oregon Spray Foam Insulation professionals today for a free spray foam roofing estimate for your Oregon home or business. Ask any questions you may have about spray foam roofing

Call (541) 325-8199